Very Paige

DIY dropcloth rug

DIY, HousePaige P15 Comments
DSC_0006.jpg

To be honest this is less a rug and more a floor cloth. It's also one of my new favorite way to incorporate prints into my home. Oh and did I mention it's cheap? Pretty much one of my favorite DIY's of all time. For some of your time and about fourty dollars you can have an awesome new floor covering. This project could be more or less expensive depending on how much your fabric of choice costs, but since you only need around two yards I can't see this getting too crazy.

Supplies

Alene's tacky glue spray (11$)

Home depot 6x9 drop cloth (10$)

2 yards of wide heavier weight fabric, I used ikea's Stockholm print (18$)

Carpet gripper (already owned, but you can pick one up super cheap at Ikea, like five dollars cheap)

Sewing machine and thread

Seam gauge

Iron

Step one

If you plan on ever being able to throw your floor cloth in the washer, please prewash it as you plan on doing so in the future. This will save you from getting some funky shrinkage and ruining all your hardwork! I didn't use any fabric softener though, because I felt like any stiffness would help keep it from curling up. 

Step two

Iron out all those wrinkles once your fabric and drop cloth are dry. I even starched mine a bit. This will help you be able to sandwich the two pieces neatly with the glue. 

Step three

Smooth out the dropcloth and start applying the tacky glue spray. I then started rolling out the fabric, right side up and sticking it to the drop cloth, slowly removing any bubbles with my hands. I ended up using the whole can, so feel free to be liberal with your spraying. It'd be a good idea to wear a mask and do this part outside. Unless glue fumes are your thing. 

Step four

Once everything is nice and glued, give it a few minutes to set, trim the drop cloth to the edge of the fabric. Flip it so the fabric side is down and start ironing over about a 1 to 1.5 seam allowance using your seam gauge. That seams kind of big, but I think it adds even more weight to the finished product. 

DSC_0112.jpg

Step five

Once everything is ironed go ahead and hem everything up. You can pink your seam allowance if you want but I really didn't think it was required.

DSC_0016.jpg

Step six

Trim your carpet gripper to fit and lay that bad boy down. Stand back and admire your work.

DSC_0007.jpg

I think I might even tack some thick felt or wool to the back of this to add some cushion, but besides that I'm very happy with it! For those of you worried about it not staying put, never fear! I did the twist and shout test, plus the crazy dog after a bath test. In my very scientific studies it moved nay once. I even vacuumed it, with my sweeper brush on, and it worked out fine.

Really theres no reason not to give this little rug a try! 

For your time, here's the previously mentioned crazy dog photobombing my rug shots.

DSC_0012.jpg
DSC_0013.jpg

Inspired by this

tutorial.

♥ Paige

I love reading your comments! If you also have a blog don't forget to put it in the comment form so I can check it out. Thanks for reading, you're the best! Disclosure Here.